Scope

Honey Gold Wall Emulsion is an economical emulsion with improved hiding power and a smooth finish. It is suitable for all normal interior masonry surface including brick work, plaster, cement and wall boards.

Uses

Suitable for new or bare surfaces, priviously painted surfaces, powdery dusty surfaces etc.

Surface Preparation

Surface must be clean, dry and free from efflorescent salts, after priming with Honey Gold Prime-on, fill surface with a mixture of 4 parts chalk, 1 part lithopone and 3-4 parts Honey Gold Prime-on on to give it paste like consistency. Allow to dry overnight.

Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper and dust off. Spot prime and fill surface as described abouve is required.

Make good minor defects. For large holes and cracks use sand and cement mixture. Allow to dry. Prime surface and then fill any surface imperfections with the filler described abouve. Allw to dry over night scuff surface using abrasive paper and dust off.

After preparation apply 3 coats of Honey Gold Economy Emulsion sitre thoroughly befor use.

Application Procedure

It can be applied by roller, brush or spray. Add fresh water in a quantity, that is required to make it suitable for smooth application. Acoid over thinning. Apply three to four coats

Application Procedure (For Dark Shades)

Use Roller Only

Drying Time

2-3 hour interval between the coats

Coverage

One litre covers approximatley 11-16 meter per coat. Coverage may vary depending on nature of surface, application technique and film thickness applied.

Packing Size

This Product is available in 0.91 Litres 3.64 Litres and 14.56 Litres packs.

Important

Open can and mix to uniform consistency and color before use. Check that quality and color meet your requirement before starting the job in bulk, We can not accept any claim arising after use. Apply the principle: Same batch number on the same piece of work. Clean All equipments